Description
Mark Williams Enterprises has perfected an economical modular 9” Ford aluminum rear end housing setup that can be used for drag racing and street applications. The key element is the reinforced aluminum housing center module cast from a special grade aerospace alloy with an outstanding tensile strength of 60,000 psi (30% higher than 6061). The modular concept allows a variety of end bells and mounting brackets to suit your particular application. Price wise, the MW Modular stacks up favorably to the considerable re-working needed to make OEM units useable, or even the labor intensive fabricated steel housings. But the most important consideration is that the MW Modular housing is a completely CNC machined assembly and is extremely accurate.
There is zero stress from bending and welding typical to sheet metal rears. This assures you of an accurate housing that is properly aligned for optimum internal efficiency. The modular unit is also upgrade-able. If, at a later date you would like to change to a small or big tire application and the width needs to be changed, the appropriate end bells can be bolted on, eliminating cutting and welding.
The MW Modular 9” Pro 4-link housing is an outstanding choice for the suspended rear racecar. All 4 link brackets are CNC cut 4130 material. The layout of the 4-link attachment points is the same as used by the leading pro stock chassis builders.
Unique design features include indexing lugs on each 4-link bracket that positively lock inner and outer brackets to each other and to the housing. This insures perfect alignment of all components and eliminates the possibility of the housing and third member shifting between the brackets. To further strengthen the assembly, a 4130 cross tie bar is used to secure the 4-link brackets to the bottom of the housing. The housing also has provisions for either upper or lower wishbone attachment along with shock and wheelie bar mounts. Holes in the 4-link brackets accommodate rod ends with 1/2” cross-holes.
***These modular housings are custom made to your desired 4 link spread and wheel to wheel. Call or email the shop for a quote or to order. 931-820-0619 | sales@hammerconceptsanddesigns.com***
Options:
- Upper and lower tiebars
- HC&D traditional style adjustable shock 4 link brackets
- HC&D 1/8" adjustable 4 link brackets
- Steel brake floater
- Carbon brakefloater
- Flanged endbells (non-floater)
- 4340 or 300m axles
Tab title
Mark Williams Enterprises has perfected an economical modular 9” Ford aluminum rear end housing setup that can be used for drag racing and street applications. The key element is the reinforced aluminum housing center module cast from a special grade aerospace alloy with an outstanding tensile strength of 60,000 psi (30% higher than 6061). The modular concept allows a variety of end bells and mounting brackets to suit your particular application. Price wise, the MW Modular stacks up favorably to the considerable re-working needed to make OEM units useable, or even the labor intensive fabricated steel housings. But the most important consideration is that the MW Modular housing is a completely CNC machined assembly and is extremely accurate.
There is zero stress from bending and welding typical to sheet metal rears. This assures you of an accurate housing that is properly aligned for optimum internal efficiency. The modular unit is also upgrade-able. If, at a later date you would like to change to a small or big tire application and the width needs to be changed, the appropriate end bells can be bolted on, eliminating cutting and welding.
The MW Modular 9” Pro 4-link housing is an outstanding choice for the suspended rear racecar. All 4 link brackets are CNC cut 4130 material. The layout of the 4-link attachment points is the same as used by the leading pro stock chassis builders.
Unique design features include indexing lugs on each 4-link bracket that positively lock inner and outer brackets to each other and to the housing. This insures perfect alignment of all components and eliminates the possibility of the housing and third member shifting between the brackets. To further strengthen the assembly, a 4130 cross tie bar is used to secure the 4-link brackets to the bottom of the housing. The housing also has provisions for either upper or lower wishbone attachment along with shock and wheelie bar mounts. Holes in the 4-link brackets accommodate rod ends with 1/2” cross-holes.
***These modular housings are custom made to your desired 4 link spread and wheel to wheel. Call or email the shop for a quote or to order. 931-820-0619 | sales@hammerconceptsanddesigns.com***
Options:
- Upper and lower tiebars
- HC&D traditional style adjustable shock 4 link brackets
- HC&D 1/8" adjustable 4 link brackets
- Steel brake floater
- Carbon brakefloater
- Flanged endbells (non-floater)
- 4340 or 300m axles