Adjustable Differential Housing 4 Link Brackets (Billet)
Description
***US Patent 11396213***
We love the 1/8 adjustment the chassis brackets offer! The limitation with the chassis side brackets is having the car built with them or a lot of chassis work to install them. We had the idea a few years ago to design and offer the 1/8" adjustment capability on the housing. Now available is our billet version 4 Link bracket.
Top of the line race cars typically have an 1/8" adjustment capability often referred to as "infinite adjustment brackets". If you don't have the capability and want it on your race car, it requires the old chassis brackets to be cut out and replaced. Often times the billet brackets available have a 13" or 15" spread and need altered to work with an existing cage requiring them to be hacked on to fit. Additionally, with having a traditional 4 link bracket on the chassis and our 1/8" adjustment on the housing, you will be placing the additional weigh to an "unsprung" location creating a more favorable weight location. Our patented solution is simple and effected! Put it on your rear end housing and install the capability in any drag race car without any altering of the chassis.
The bracket assembly is made of billet 4140 with hardened heim brackets utilizing a keyway system making it a great choice for longevity and durability in extreme conditions. The heim bracket adjustment range is suitable for both small and big tire applications.
The 1/4" bolt serves as the adjustment indicator with an etched guide for a given heim hole choice, adjusting through the sweep in 1/8" increments up to 5/8" before needing to adjust to the next heim hole. Because the upper adjustments are on an angle, the upper 4 link bar stays at the same approximate nominal length through the adjustment sweep making the adjustment variable more consistent.
Specs:
- 4140 material
- 3/4" billet main bracket
- 1/2" billet heim brackets
- NAS hardware
- Key way locking system for ultimate strength
- 3.5" Axle tube radius
- 1/2" Holes on 5/8" spacing
- 1/8" adjustment capability
- Bolt on ARB tabs
- Bolt on adjustable shock/wheelie bar tab brackets
Adjustable Differential Housing 4 Link Brackets (Billet) kit will include:
- 2ea 3/4” 4 link housing main brackets
- 4ea 1/2" 4 link housing upper heim brackets
- 4ea 1/2" 4 link housing lower heim brackets
- 4ea 1/8" ARB tabs
- 4ea 1/8 Adjustable shock mount/wheelie bar tab brackets
- 3/8-24 NAS bolts, NAS washers, and nylon jam nuts
- 1/4-28 NAS/12 point bolts, NAS washers, and nylon jam nuts
Tab title
***US Patent 11396213***
We love the 1/8 adjustment the chassis brackets offer! The limitation with the chassis side brackets is having the car built with them or a lot of chassis work to install them. We had the idea a few years ago to design and offer the 1/8" adjustment capability on the housing. Now available is our billet version 4 Link bracket.
Top of the line race cars typically have an 1/8" adjustment capability often referred to as "infinite adjustment brackets". If you don't have the capability and want it on your race car, it requires the old chassis brackets to be cut out and replaced. Often times the billet brackets available have a 13" or 15" spread and need altered to work with an existing cage requiring them to be hacked on to fit. Additionally, with having a traditional 4 link bracket on the chassis and our 1/8" adjustment on the housing, you will be placing the additional weigh to an "unsprung" location creating a more favorable weight location. Our patented solution is simple and effected! Put it on your rear end housing and install the capability in any drag race car without any altering of the chassis.
The bracket assembly is made of billet 4140 with hardened heim brackets utilizing a keyway system making it a great choice for longevity and durability in extreme conditions. The heim bracket adjustment range is suitable for both small and big tire applications.
The 1/4" bolt serves as the adjustment indicator with an etched guide for a given heim hole choice, adjusting through the sweep in 1/8" increments up to 5/8" before needing to adjust to the next heim hole. Because the upper adjustments are on an angle, the upper 4 link bar stays at the same approximate nominal length through the adjustment sweep making the adjustment variable more consistent.
Specs:
- 4140 material
- 3/4" billet main bracket
- 1/2" billet heim brackets
- NAS hardware
- Key way locking system for ultimate strength
- 3.5" Axle tube radius
- 1/2" Holes on 5/8" spacing
- 1/8" adjustment capability
- Bolt on ARB tabs
- Bolt on adjustable shock/wheelie bar tab brackets
Adjustable Differential Housing 4 Link Brackets (Billet) kit will include:
- 2ea 3/4” 4 link housing main brackets
- 4ea 1/2" 4 link housing upper heim brackets
- 4ea 1/2" 4 link housing lower heim brackets
- 4ea 1/8" ARB tabs
- 4ea 1/8 Adjustable shock mount/wheelie bar tab brackets
- 3/8-24 NAS bolts, NAS washers, and nylon jam nuts
- 1/4-28 NAS/12 point bolts, NAS washers, and nylon jam nuts