Economy Layered 1/8" Adjustable Chassis 4 Link Bracket Kit

We have had numerous requests to offer a complete 4 link kit rather than individual items. This kit features several options to customize to your particular requirements.

It is becoming quite popular and common to multi-class race or go no prep racing with the same car.  Having to swap back and forth between a small or big tires for these events can be challenging when a cars suspension geometry wasn't designed for the swap. This chassis bracket when combined with our housing bracket will accommodate either small or big tire combo geometry offering a favorable IC/AS adjustment range for most applications.

We have came up with an economical solution for 1/8" adjustment tuning on the traditional chassis 4 link bracket. The bracket assembly is made of 4130N making it a great choice for longevity and durability. Heim bracket adjustment range is suitable for both small and big tire applications.

The 1/4 bolt serves as the adjustment indicator for a given heim hole choice, adjusting through the sweep in 1/8" increments up to 5/8" before needing to adjust to the next heim hole.  Because the upper adjustments are on an angle, the upper 4 link bar stays at the same approximate nominal length through the adjustment sweep making the adjustment variable more consistent. 

This kit uses our billet adjustable shock mounts offering a lot of adjustability vs a fixed coilover mount. This feature is great for those that don't have their chassis geometry laid out but know with this kit they will have the range of adjustment required once the layout has been determined

Housing Bracket Specs:

• 4130 material
• 1/4" main bracket 
• 1/8" main bracket doublers
• 3.5" Axle tube radius
• 1/2" Bolt holes
• 5/8" hole adjustment spacing
• Upper cross support tube hole
• Integrated ARB mount hole
• Integrated wheelie bar tabs
• Shock mount holes with 1/2" spacing
• Pro-Jack notches

Economy Layered 1/8" Adjustable Chassis Bracket Specs:

• 4130N material
• 1/4" main brackets layered x 3 for overall width of 3/4"
• 1/4" heim brackets
• 1/8" doublers
  
• 12pt grade 9 hardware
• 22" Radius on upper hole arc
• 1 5/8" Tube notches
• 15" Spread (top of lower notch to bottom of top notch)
• 4 deg angle between upper and lower notch center
• 1/2" Holes on 5/8" spacing
• 1/8" adjustment capability
• No lightening pocket in center of bracket making it a good location to weld support tube gussets

4 Link Bar Specs:

• 4130 material
• 18" of tube ( 24" heim ball center to center) 
• 4130 Threaded tube adapters
  
• 4130 1/2" bore x 3/4 shank heims / jam nuts
• Heims are 3/4” wide for standard 4 link bracket spacing

Billet Coilover Mount Specs:

• 6061 material
• Inline with 4 link bracket center or 1 1/2" offset options
• 3/4" width for mounting between 4 link or shock brackets
• 3/8" holes on a 1.5" spacing (common with 3/4" spacing on housing shock or 4 link brackets)
• 1/2" shock mount holes with 1" shock eye spacing
• 3" distance between 3/8" shock bracket mount holes and 1/2" shock eye holes
• Extended and recessed slot to clear an AFCO shock mount body
• Grade 8 hardware included

Hardware Specs:

• AN Bolt Kit

Kit Options:

• Economy layered 1/8" adjustable chassis bracket  length 13" or 15"
• 4 link bar diameter 1 1/4 x .095, 1 1/2 x .120, 1 5/8 x .120
• Billet coilover mounts inline or offset