Description
The HC&D Elite Series II Wishbone kit was purpose built to offer a precise slider that doesn't require grease as lubricant avoiding built up grime, rubber, and dirt on your slider. Slop translates to lateral movement and we minimize it with this precision machined wishbone slider and kit. With a 1 3/4" external slider tube and 1 1/4" internal slider shaft, makes this setup very strong, slides super smooth, and durable.
Specs:
- 10" 4140 1 1/4" ground and polished internal slider shaft
- 8" 1 3/4 x .188 4130 external slider tube
- Carbon composite dry run bushings
- 3/4-1/2 4130 slider heim
- All 4130 construction
- Kit includes enough material to make a wishbone that is 32" long x 16" wide
Elite series wishbone kit will include:
- 1ea 10" internal slider shaft
- 1ea 8" external slider tube
- 2ea Carbon composite bushings
- 2ea Spiral lock rings
- 1ea RH 3/4-1/2 4130 heim with jam nut
- 2ea RH 5/8-1/2 4130 heims with jam nuts
- 2ea RH 1 1/8 .065 x 5/8-18 4130 threaded tube adapters
- 2ea 24" 1 1/8 .065 4130 tube
- 2ea 18" 3/4 .058 or 7/8 .065 4130 tube
*** Recommend the use of a Teflon or Silicone dry lubricant for slider shaft/bushings***
***Welding Required***
Remove carbon composite bushings before welding. Avoid welding the legs to the upper and lower 2" of external slider. If you weld above or below the middle 5", it may distort the slider tube and will make inserting and removal of bushings difficult.
Tab title
The HC&D Elite Series II Wishbone kit was purpose built to offer a precise slider that doesn't require grease as lubricant avoiding built up grime, rubber, and dirt on your slider. Slop translates to lateral movement and we minimize it with this precision machined wishbone slider and kit. With a 1 3/4" external slider tube and 1 1/4" internal slider shaft, makes this setup very strong, slides super smooth, and durable.
Specs:
- 10" 4140 1 1/4" ground and polished internal slider shaft
- 8" 1 3/4 x .188 4130 external slider tube
- Carbon composite dry run bushings
- 3/4-1/2 4130 slider heim
- All 4130 construction
- Kit includes enough material to make a wishbone that is 32" long x 16" wide
Elite series wishbone kit will include:
- 1ea 10" internal slider shaft
- 1ea 8" external slider tube
- 2ea Carbon composite bushings
- 2ea Spiral lock rings
- 1ea RH 3/4-1/2 4130 heim with jam nut
- 2ea RH 5/8-1/2 4130 heims with jam nuts
- 2ea RH 1 1/8 .065 x 5/8-18 4130 threaded tube adapters
- 2ea 24" 1 1/8 .065 4130 tube
- 2ea 18" 3/4 .058 or 7/8 .065 4130 tube
*** Recommend the use of a Teflon or Silicone dry lubricant for slider shaft/bushings***
***Welding Required***
Remove carbon composite bushings before welding. Avoid welding the legs to the upper and lower 2" of external slider. If you weld above or below the middle 5", it may distort the slider tube and will make inserting and removal of bushings difficult.